new guy doing vr6 conversion (hopefully)

chrisf199 wrote:

jedi16v wrote:Welcome mate, You can use the mk3 subframe and wishbones with the later mk2 hubs to keep your 4 stud, you'd need the mk3 track rods and ends as well if so that you can set the tracking properly or if you're not too bothered about going for the wider track you can still use mk2 wishbones on a mk3 subframe, good luck with it bud

when you say later mk2 hubs do you mean any late mk2 or does it have to be gti? ive looked on ebay and there are two different sizes 90 and 100mm for the hubs and i aint got a scooby doo which are the ones i need?????

needs to be a gti 16V for a golf or you can use any corrado ones, 100mm is to do with the driveshaft diameter if i remember correctly which you'll need

hi all
looks like i need to sell my k reg jetta vr6 project, engine is in and everything just needs a few bits done and i have a date in court with my ex wife so sadly it has to go along with the old engine that came out of it 100k (still running aswell) im gutted,give me a shout if your interested 07528796091 (chris), im looking for around £800,white, 69k, coilovers,full s/steel exhaust, chip, there are a few small dents and scratches but nothing bad. it needs the rear axl to be fitted, brake pipes and hydrolic clutch sorted and the wires done on the interior,theres no rust on this beaut anyway gutted really gutted. never get married!!!!!

happy days!!!! i sold the jetta and now have it back what a result, anyone got a rear spoiler they want to sell?????

guys anyone know what pedals i need for the hydrolic clutch i know its a passat but dont know what year and exactly what i need also which fuel pump will work
thanks

Go for a Mk3 golf VR6 fuel tank the pump sits in the top of the tank so makes it alot neater on the underneath and no more rusty lines to worry about

gents i need some help, im in a bit of a state with this now, i have run the wires through the car obviously the connectors are different for the lights, heaters etc, does anyone have a diagram that i could follow please

Hi buddy i havnt got the details however i found mk2 vr6 dot com a great help for that kind of stuff when i did mine

hi
pritty sure a b5 passat pedal box from a tdi will work(thinck thats wots in my mk2 golf vr6)you will need to reinfors bulkhead as they can crack with the extra fors involed
what year is the jetta this con is mush easyer with a 90spec car pritty much plugs strat in.