MY G Reg Jetta GTI 16v mk2.. Well new for me

Subject: MY G Reg Jetta GTI 16v mk2.. Well new for me Fri Sep 14, 2007 10:56 am

So i Picked up my third Jetta GTI 16v lastnight (apparently they are rare lol) its in much better condition than any of my previose ones so looking forward to getting it on the road.

A few of you may already know it lol its Andy Murphys old one which is also Reavers old one lol 3rd generation on this site already.

so first things first the plans:

and first of the plans is the need to do stuff:

and the first of that is, sort out the very lumpy idle, sounds like its missing but i dont think it is, could be a number of things

low fuel pressure, plugs and leads, Warm up Regulator, leaky injector, Timing Cam or dissy and possibly unregulated air getting into the manifold i.e. manifold seals are shafted / none present

hopefully its timming as the car isnt half as quick as my current jetta gti 16v which would explane that.

secondly on the way home, had a few flashes and buzzes from the low oil pressure warning buzzer, now i have a feeling the oil pump will have been replaced but hopefully reaver can confirm that ?????

so its either low oil level, or its a crap sender again if Reaver could confirm if its a vw or gsf sender ill know weather to skip it or not gsf senders are just pants. if i cant confirm either ill get it onto an oil pressure tester and maybe get the oil pump replaced with a VW one

after that it needs a new windscreen, might be able to get this out of the insurance.

next up is paint, it needs the bonnet doing, lots of chips on the bonnet, the bottom of the rear doors, there ever so slightly rusting through so would like to catch them before they go.

there is a spot of rust on the tail between badges so would get that done aswell also there is some rust under the windscreen so that will need to go and maybe the spare blank for the window wiper can come off at the same time.

could also fill in the wing areal blank but that wing doesnt need painting so probably wont bother. and finally someone has stuck and alarm type key lock dead center into the rear quater panel (of all the daft stupid places to put it!!!!) so will have to remove that somehow

also i may get the rear arches off, unless reaver can tell me he had them off and they are fine, always good to catch any issues with them early

also the handbrake needs doing and my mk4 calipers should sort that out.

finally the rear bumper, looks like its had a knock either reversed into a ballad or someones hit it, the rear bumper isnt level and with headlights on you can see a crease where whatever it was has touched it, i have a spare jetta big bumper thats pretty perfect so might swap the skins over and try to get the bumper iron jigged level.

they are the things i will defo do in the next few months.

then its on to the fun stuff.

have leather intirior to put in altho the stock intirior is really nice my leathers i think will look better. however does require welding in 2 brackets on each turret to accept the folding rear seats form the golf but i think ill have it done properly and sprayed to look OEM.

electric windows to go with the none winder leather door cards

rallye grill, might only put this on when i have found a badged rally grill tho (howeer the lights are so bright i might miss them in the winter so might be sooner than i think)

headlight relays will be fitted and fog lights wired to come on with high beam just for that extra light on the road, the loom ive made cost me £50 so far so its a good one and even does side lights lol also will hopefully not have to cut many wires so will be convertable back to stock shoudl it be needed.

have a 280mm mk3 vr6 / g60 brake setup with all braided lines to go on even have master cylinder and a few other bits, if i feel the need (was going to go on to my curent car but not now) only issue is the bbs wheels that are on might not be wide enough to fit the calipers lol might have to space them out 5mm hopefully nothing too much, also might get my Azev A's refurbished and fit them but no plans yet.

will get a boot pop soilonid and have the boot delocked, this is purely for security tho, had my boot opened by a thief in about 2 seconds on bonfire night last year so i had the lock welded over and the button filled.

probably delock the inside doors too, again security, had my stereo stolen on bonfire night, but it gave me much satisfaction to know that when he stole it he couldnt unlock the doors at all after smashing the window so had to climb in through the window over the broken glass and climb out the same way... ha!

other than that if i find a tilt and slide i might fit that, and maybe my 2.0li bottom end in the distant future and maybe some smoked topped 16v us style rear lights if i find any but in a cosmetic way leave it pretty much standard and origional - oh also might get some led indicators crystal clear ones for the fron, dunno why, i just liek them lol

i was going to lower it on my Coilevers Spax RSX but decided on my way home lastnight at least for the time being thats not going to happen (will depend on how it handels when i drive it properly) basically as it will most likely be my daily driver for now, i think the standard suspension andy put on is a much better idea, as it wont shake the car apart like mine does currently, and maybe to increas handeling i can go for a set of anti roll bars which will do the trick. also will be nice to be able to go over speed bumps lol

so thats all i can think of for now will try and get the urgent things done asap and alot of the stuff that needs swapping over needs doing soo so i can get rid of my cirrent one, my dad needs the space on the drive lol

so keep posted ill get some picks up when the weather is nice and ive claybared it, anyone who saw my last thread on cgti knows that this thread could be epicly long and updated lol!

also i would love it if reaver could detail everything done to the enigne in his posetion and maybe tell me where he got the parts so i can figure out if i wanna contact my friend at vw and get them replaced with geniune stuff

wish me luck

ps. could someone move this to the members rides when it has been updated with some pics Very Happy

Admin Age : 27 Joined : 08 May 2007 Posts : 592

Your plan's sounds great!

Not sure what the oil buzzer thing is though - the oil is checked regularly and it didn't do it before the new box. I only managed a short run afterwards though.

I have a couple of pics for people to familiarise themselves with the car.

_________________

Looks Cool Cool

I love the styling on the MK2, sooooooo much better looking than the golf too! I remember when i was little my uncle used to have one of these and i begged him so much to get rid of it .......... more fool me! Wish he would have kept it now! Crying or Very sad

updated sig lol!

Well what can i say im glad she went to somone in the club ill tell you all i can buddy ref

1/ secondly on the way home, had a few flashes and buzzes from the low oil pressure warning buzzer, now i have a feeling the oil pump will have been replaced but hopefully reaver can confirm that ?????

Answer: Im fairly sure the oil pump wasnt replaced in the end as we cleaned it all and she ran fine

2/ so its either low oil level, or its a crap sender again if Reaver could confirm if its a vw or gsf sender ill know weather to skip it or not gsf senders are just pants. if i cant confirm either ill get it onto an oil pressure tester and maybe get the oil pump replaced with a VW one

Answer: This would have been a GSF item if replaced

3/ also i may get the rear arches off, unless reaver can tell me he had them off and they are fine, always good to catch any issues with them early

also the handbrake needs doing and my mk4 calipers should sort that out.

finally the rear bumper, looks like its had a knock either reversed into a ballad or someones hit it, the rear bumper isnt level and with headlights on you can see a crease where whatever it was has touched it, i have a spare jetta big bumper thats pretty perfect so might swap the skins over and try to get the bumper iron jigged level.

Answer: The Arches were never removed when i had it so could be worth while and the rear bumper when i had it looked somthing like

As you can see had a rather large dent from the previous owner we did our best to push it out but hey
_________________

you did a good job of pushing it out lol, i only saw the crease because my headlights emphisised it as i drove behind it when i picked it up. have a genuine rear skin which i could never find an iron for so will probably swap the skins and get the iron straightened.

will probably swap all my senders over off my car too as there all good, gsf senders are best server as paper weights. lol

what about the water pump mate? any idea if it was replaced, gsf / VW?

ive just put a brand new genuine one on my current car which i might swap over just for piece of mind.

also anyt idea what milage it was on when you did the cam belt and the rebuild?

ill make sure i get lots of pics up in the future, dont think it will change a great deal just a few tweaks Very Happy

Will have to have a word with my farter in law about the water pump not sure whether we did it or not. Strange thing was i never intended to sell the car but we just didnt have the room for it and the Bora took priority look after her mate i think shes a bit of a clean classic Very Happy

_________________

yeah very much so cant believe how origional she is, will be fitting all genuine parts when i can and wont rip her to pieces with tat and crap, should look very clean and tidy when done!

ooh also something im going to do which ive not mentiond is get the ignition key barrel rebuilt so as its the same as all the other locks on the car, hate having more than one key especially when its only one lock lol.

ok here is an update with lots more pics! lol

ok thought it was about time i showed you some pics of the new car! took a few the other day. its been outside a week or two and needs a clean but still looks good to me! lol

so here we go

From the side:

From the back:

From the Front:

From the Back:

you should be able to see all images of this car in my photo bucket album by Clicking Here!!

Ok so they are the pics for now untill i get it cleaned up and looking even better.

so i thought id post up some pics of everything i need to change on it and what i plan to do, there may be quite a few lol.

so first off i wanted to change the indicators that it came with:

changed them to this today

got them from volks bits, they look great, but the build quality is shat i doubt ill keep them on, 20 secs after i switched em on they were fogging up lol plus when they arrived the were wired up backwards so they wouldnt work when plugged in, had to swap the wires arount to get them to work!

ok so first on the repair list is this really annoying key hole drilled into the rear drivers wing god knows what for, best guess is some kind of alarm

next is the rust underneath the wind screen

and the spec of rust on the rear panel.

also need to sort out the rust thats just starting to appear on under the boot seal very common on the jetta, luckily tho not structural

next up is the rear bumber, you can just see the crease here where is have been dented in the past

and as a result of that dent the bumper has moved slighly as you can see by comparing these two pics, however i have anoher genuine bumper in my garage i can replace this with, just need a bumper iron for it, or to have this bumper jigged straight

pic one drivers side gap

pic two passanger side gap

next i have to get a new windscreen because of this crack

also wan to get any old set of clocks to use to replae the front glass as this has cracked also

should be easy to swap the glass over, will also do the digital clock at the same time as its green and all other illumination is red

next im going to change the roof lining to black, have a black roof linning in the loft, will however need to find a sunroof cover and two sun visors but should hopefully not be too hard.

roof linnning is a little nasty, think there have been smokers in this car at some point as its a little yellowish

intirior is in great nick, and the seats have prety deep buckets, deaper than my gti ones, however they anrt perfect and i prefer the leather so they will be going

as will the door cards

probably end up in my current gti

also need to repair a fog lamp as the drivers side is cracked, bt i have another set in the garage somewhere so not a problem

aswell as getting a cat one fitted, doing headlight relays and fitting my stereo stuff, will need to do some re wireing in the engine bay, its been attempted before but im not perfectly happy with it so that will have to go

as will this radiator and fan setup, its a gti fan to a none gti radiator with extended arms both sides, the radiator looks like its had it anyway lol have all the needed parts in the shed

engine bay looks nice 50mm inlet already fitted the origional cover is on the bottom of the bonnet and its all pretty much unmolested to say all the work thats gone on under there

also want to replace the thin horrible scuttle cover with the newer thicker item from vw

will also be having my wheel balenced again, so i can get rid of all the weights someone has bolted to the outside of the wheels

and will get a new one of these or spray this one black etc so it looks a little nicer

on top of all that ill be fitting Electric mirrors should i body colour code them?

electric windows, would really like a new set all around really but can never find any and its £250 per window from vw... ouch

280mm brakes with help from spacers from a friend 10mm

mk4 rear calipers

baded hoses all round

hopefully if i can find any, some smoked top factory us spec rear lights

maybe chineese door handles if i feel the need lol.

my rallye grill and leathers of course

and maybe and only a small maybe my exhaust, but possibly going to have another one made thats slightly smaller.

the rest im probably going to leave as origional as possible, altho i might go for some deep dish wheels someday and a few tweaks here and there lol.

seems like alot of bad poins on the list, but most of them are only small and the rest dont really equate to what i would have to do to my current car and most of the issues you cant even tell are there unless the're pointed out.

so what do you think?

ok so been looking into why the car is running really lumpy, and noticed this wasnt connected properly, when i tried to connect it the way it was hanging off, the back of it was in the way and wouldnt fit infront of the suspension turret which is why it came off in the first place.

this is the unit

this is where its supposed to fit

also when i took it out to look at it i noticed the wires on the connetor were comepletely missing, so thats a rewire job for the next few weeks

here is how its supposed to fit

you can easily see the curved hose so it avoids the suspnsion turret, bust been and ordered the two hoses from vw the curved one was £3.50 lol not worth not buying.

also just ordered a new front windscreen £70 inc VAT and knowing the guy behid the parts desk should get it for about £60 hopefully, i was going to do it through insurance after id got it on the road, but the excess would have been at least £50 ish so for the extra £10 - £20 its not worth the hassle lol

cant wait for it all to arrive now!

also already had the car in and had all new gearbox bshes and linkages fitted as the car was struggling to get in 1st gear, not sure how cured it is yet as not driven it but my dad seems to think its fine! cost me £58 :S lol.

its booked backin on wednesday for an oil pressure test jus to be sure and to have the engine timing and co level adjusted so should rn fine after that hopefully!

sounds like a right hand full, well its what makes it a project i guess.
_________________
JETTA - VENTO - JETTA - VENTO - JETTA - VENTO - JETTA - VENTO - JETTA - VENTO - JETTA - VENTO -

Managed to solder the connector pictured above back together on sunday, had to use a connector from my audi / mk3 looms i have lying in the shed lol but all went back together pretty well and was pleased with the soldering effort lol just waiting for the pipes now

Admin Age : 27 Joined : 08 May 2007 Posts : 592

Looking good Steve, can't wait to see it develop!
_________________

Man im so glad to here your goin down the oe route i said to andy when i sold it that i hoped hed finish the job keep us updated mate there was a time i was trying to make that car the club mascot just never had the funds to finish it Crying or Very sad

_________________